Specifications:
Product name: Smart toothbrush sterilizer
Product color: white
UV wavelength: 253.7nm
Product size: 15.7x7.7x3.8cm / 6.13x3.01x1.49inch
Color box size: 18.5x10x4.35cm / 7.22x3.9x1.70inch
Power consumption: DC--5.0V / 500mA (large)
(Applicable to the output of various mobile phone charging adapters and charging adapters with USB output interface: DC5.0V == 1000mA)
Automatic sterilization time: 6 minutes +-10 seconds
Product capacity: can disinfect 4 toothbrushes and a beard cutter head at the same time
Features:
♥UV sterilizer, effective and not smelly, no chemical/disinfectant fluid.
♥High-efficiency lens to increase UV intensity.
♥U-shaped UV lamp, larger working area than others.
♥Using USB charging cable to connect to the power supply.
♥Automactic power off after 6-min sterilization.
♥Suitable for family use. Can used for 4 toothbrushes and 1 shaver.(Not included)
Package included:
1x Smart toothbrush sterilizer
1x USB CableInstallation Notes
Fixed toothbrush sterilizer
1. This product needs to be fixed on a clean, dry, ventilated, smooth tile wall, with electricity nearby.
The power socket and the sterilizer should not be more than 75CM away from the power socket, and the toothbrush should be easily accessible in a fixed position.
2. Use a clean, dry cloth to wipe the tile surface of the toothbrush sterilizer to be cleaned.
3. Tear off the hook of the toothbrush sterilizer. Protect the paper with white adhesive tape on it and wipe the rear hook on the corresponding wipe
The clean tile surface is straight (two rounded corners face up and 2 square corners face down) and fixed to the tile on the wall.
4. If the wall is not smooth enough, you need to drill the wall in advance according to the size of the two holes on the rear hook.
Two φ6mm holes are inserted into a plastic expansion tube and fixed with screws.
5. Hang the toothbrush sterilizer to the rear hook. Above.
6. Plug in the MICRO USB power cable, plug the small end into the USB socket on the right side of the toothbrush sterilizer, The big head is connected to the USB port (DC5.0V-= 1000mA) of the mobile phone charging adapter of any brand or Charging treasure USB output interface.
