Specifications:
Product name: Auto-stamp Motorized Meso Machine
Model name: Ultima M5
Needle material: Stainless Steel
Target Area:Face
Input:AC 100-240V 50/60Hz
Adapter:5V,1000mA
Pen Size:approx.14.7*2.3cm(L*D)
Packing Size:approx.17*12.5*5.5cm(L*W*H)
Weight:about 365g
Concerns:Acne, Age Spots/Freckles, Blemishes, Early Signs of Aging, Wrinkles/Lines
(1cm=10mm=0.39inch)
Packing Included:
1x Host
1x US Adaptor
1x Box
1x English Manual
2x Cartridges 12pin Needles
10x Cartridges 36pin Needles
Functions:
* Scar removal including acne scar removal or treatment.
* Acne Scar Removal, Acne Scar Treatment.
* Anti Wrinkle Treatment, Anti Aging.
* Hair Loss Treatment or Hair Restoration.
* Surgical Scar Removal.
* Hyper pigmentation treatment.
* treatment of acne scars and healing wounds.
How To Operate:
1.Setting Adapter Mode
(1) Plug in DC adaptor to the jack.
(2) Plug in DC adaptor to AC outlet.
2. How to install a cartridges
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2of machine, push needles cartridge horizontally up to the end.
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine
(5) If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots (slot 1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5 speed level control
Pressing the switch 2 seconds to open the device, It starts from the lowest speed to highest speed when you turn on the power firstly.The speed cycles low to high .Please press the switch 2 seconds when you need to stop the device.The flicker frequency of light faster, the speed is higher.
(3) Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise.Turning it clockwise, length of it will be longer.Turning it counter clockwise, length of it will be shorter.
How to use:
*Use facial cleanser to clean the skin area that you want to therapy for;
*Disinfect the micro needles through the 75% alcohol / normal saline / ultraviolet ray;
*Dissolve the lyophilized powder and roll with needles together (need to use with lyophilized powder or related essence);
*Operate about 8-15min for each part rolling by cross way;
*Facial operating gradation: Forehead—the right size face--the left size face;
*It will be better if dropping lyophilized powder or related essence at the same time when rolling;
*Apply the special ice facial mask after rolling, apply for about 30min (Cannot wash with water);
*The operation skin area can’t touch water within 6-8 hours, to prevent the infection;
*Professional care1-2 times a week, 10 times for a treatment course, suggest to use more than 2 treatment courses continuously to get a better effect;
Caution:
For your Safety,use one roller per one person only.
1.Do not force the machine into the skin but simply use mild pressure.
2.Roller obliquely at the same intensity covering the same areas vertically and horizontally.
3.Apply protocols according to clients's needs.
4.After the treatment,apply post-caresolutions for the skin protection.
5.For safety correct use,read the manual through before the machine.
